Fuel block that mounts to the top of the crankcase and is set for 4 cylinders.
- Two 50psi fuel pressure transducers for the Left/Right systems.
- Four 920-04-03 port to flare fittings.
- One AN-6 to 1/8 NPT main fuel connector.
- Two AN-4 port plugs.
- One 1/8 NPT plug
- Requires assembly.
- Two 1/4 UNC bolts and lock nuts.
- Two 1/4 washers.
- Two spacers.
Designed to mount on the center two bolts of the engine.
All ports must be safety wired and recommended installed with thread lock.
1/8 NPT ports require Teflon thread sealant.
Under NO circumstance is RTV to be used on any fittings.
Experimental aircraft use only.
Will require 3/16" pipe and flare fittings to route to the fuel injectors.
Cables and looms are supplied seperately.